I’m finding a few minor things I need to do. One of these was to adjust the pedal position out a bit. Easily done. Another is to alter the handlebar’s. I’m not quite satisfied but can’t yet decide what I want to do. I want to lower them but then they need to be closer to miss my knees and they are too close anyway for my liking. Decisions decisions.
One decision I had to make was what to do about the long length of chain flopping about and the noise from the chain guide (ie., derailleur), No matter what I did it would rub or move because I had it mounted with the guide pulley bolt.
This all came to a head when one of the little idlers disintegrated while out on a ride. I don’t think burning off roadies had anything to do with it but maybe it was the punishment for that.
Anyway I decided to go with simplicity and use a chain tube. I’ve had good luck with them.
The photos shows the result. It is quiet, doesn’t seem to rob any detectable power and has stopped the chain shaking all over the place. I think it is a considerable improvement on what I had before and looks a lot neater.
~ John Lewis
Read more of John’s Marauder build blog: http://forum.atomiczombie.com/showthread.php?t=2116
The Marauder is a great way to get an intense workout and show off your building skills. Because the design is based on common bicycle parts, you won’t crash your budget, and can be riding it in a few weekends. There is plenty of room for modifications, and the Marauder makes a great platform for experimenting with aerodynamic fairings or electric power.
Every step of the build is detailed using high resolution photos, complete explanations of how each part of the vehicle works, and tips on how to customize the design. Even if you have never taken a hacksaw to a bicycle, you will be able to follow along and complete the build. Read more…