Building a Front Wheel Drive recumbent lowracer – England

recumbent lowracer

Ian Swindells of England built this lowracer from scrap and custom parts.

Ian W. Swindells (forum member swizz69) always wanted a recumbent bicycle. Researching online brought him to the AtomicZombie builders forum.

After learning about the Warrior Tadpole Trike, Swindells was motivated to design and build a Front Wheel Drive recumbent lowracer. In a feature article for the AZ newsletter, Swindells discusses the project and the challenges along the way.

Read his story>>

Advertisements

Tay’s homemade chopper trike – England

Tay helped his dad build this chopper trike from scrap bike parts.

Submitted by AtomicZombie forum member and bike builder, Naughtyboy.

“We built this because my youngest two kids needed bigger bikes and they both love workshop time with daddy.

One of the kids from school turned up on a shop built chopper, so Tay looked it over and said, “Me and my dad can build (one) better.”

We’ve built all sorts from scrap wood and metal and they have even helped me with rebuilding an old Land rover.

Tay decided he wanted a trike after seeing my Gladiator (chopper trike) plans, and he also looked through my 15 other plans to plan future bikes. The front is based on the Gladiator chopper trike and the rear, I think, was based on the DeltaRunner Recumbent Trike, but flipped over.

The forks are made from 16mm od x 8mm id blow pin shafts left over from machine re-furb at work. Suspension is made of old trampoline springs I found. The handlebars are from an old rotavator which I’m planning on using engine on quad-cycle (so many ideas, so little time).

I had to turn some sleeves to fit them as id was bigger than od of forks. Tay helped with drilling on lathe. Front wheel is 20″ and back started as the same size, but are now 26″ as we needed the smaller one for his little sister’s trike.

I just wish he would let me finish painting it, but he’s too busy racing on the road with his mates! I am impressed with how tight a turning circle it as and how fast he can go.”

Read more about this project at the builders forum:
http://forum.atomiczombie.com/showthread.php/9247-happy-boy

More pictures in the bike builders gallery:
http://forum.atomiczombie.com/gallery/browseimages.php?do=member&imageuser=5871

www.AtomicZombie.com

Handmade steampunk recumbent chopper

“BLACKBIRD steampunk recumbent chopper. 11 feet long. 36V with a 750W hubmotor. 13K miles so far commuting!”  ~ Cat

 
Very cool! Thanks for sharing