Tay’s homemade chopper trike – England

Tay helped his dad build this chopper trike from scrap bike parts.

Submitted by AtomicZombie forum member and bike builder, Naughtyboy.

“We built this because my youngest two kids needed bigger bikes and they both love workshop time with daddy.

One of the kids from school turned up on a shop built chopper, so Tay looked it over and said, “Me and my dad can build (one) better.”

We’ve built all sorts from scrap wood and metal and they have even helped me with rebuilding an old Land rover.

Tay decided he wanted a trike after seeing my Gladiator (chopper trike) plans, and he also looked through my 15 other plans to plan future bikes. The front is based on the Gladiator chopper trike and the rear, I think, was based on the DeltaRunner Recumbent Trike, but flipped over.

The forks are made from 16mm od x 8mm id blow pin shafts left over from machine re-furb at work. Suspension is made of old trampoline springs I found. The handlebars are from an old rotavator which I’m planning on using engine on quad-cycle (so many ideas, so little time).

I had to turn some sleeves to fit them as id was bigger than od of forks. Tay helped with drilling on lathe. Front wheel is 20″ and back started as the same size, but are now 26″ as we needed the smaller one for his little sister’s trike.

I just wish he would let me finish painting it, but he’s too busy racing on the road with his mates! I am impressed with how tight a turning circle it as and how fast he can go.”

Read more about this project at the builders forum:
http://forum.atomiczombie.com/showthread.php/9247-happy-boy

More pictures in the bike builders gallery:
http://forum.atomiczombie.com/gallery/browseimages.php?do=member&imageuser=5871

www.AtomicZombie.com

Max handmade electric velomobile, made in the USA

velomobile

A true green powered vehicle that looks great with mint performance.

AtomicZombie forum member, Canvasman, is crazy about trikes and velos. Check out his latest velomobile. It’s a beauty!

Congratulations on a job well done! See more of Canvasman’s bike creations in the AtomicZombie builders gallery. There are more than 4,000 photos of recumbents, trikes, tandems, tall bikes, ebikes, cargo bicycles, trailers, velomobiles, kids’ bikes, fun bicycles and more.

http://forum.atomiczombie.com/gallery

Homemade FWD Recumbent Lowracer

front wheel drive recumbent

A comfortable and functional handmade front wheel drive recumbent made by Swizz69 in England, UK.

Bike builder Swizz69 of England, UK, shares photos of his recently built recumbent lowracer @ the AtomicZombie builders gallery. It’s a beauty!

“Whilst not a AZ design, it was built with much Zombie inspiration, with 40mm mild steel tube frame and fwd forks, Ocean Cycles seat, Tandem Stem, Sturmey Archer drum braked hubs, Marathon Racer tyres. (It) rides nice and the front wheel drive works well.”

See more @ the AZ builders gallery: http://forum.atomiczombie.com/gallery

Bike builders news – Pedal Positive!

Think Positive…Pedal Positive! In this issue, Joe Crennen, the creative genius behind Pedal Positive, reveals what drives his creativity, the birth of Pedalpalooza and pedal tractor pull competitions. Folks in Colorado love bikes. Read about some of the unique human powered projects Joe works on.

Also in this issue, Builders Gallery: recumbents, trikes, choppers, tandems, kids’ bikes, tallbikes, electric and motor cycles, cargo bicycles, and more. More than 2 million views!

We need your help. Find out how you can get involved.

This and archived newsletters can be found here: http://atomiczombie.com/NewsLetters.aspx

A unique highway lowracer

A big wheel forkless lowracer

 

Even though my bike building has come to a bit of a halt this year, that doesn’t mean I’m not coming up with new ideas on a daily basis.  A few times a day, I like to find a quiet place to relax with a notebook and sketch up new project ideas. I have really missed my Marauder. I think it may be time to make another long wheelbase lowracer so I can get out once in awhile to feel that burn as I push both machine and engine to the limits. The terrain out here is not the same as the city, so my lowracer will need to have suspension to take me down the gravel road out to the highway. There isn’t much traffic on the paved highway around here and the ride would certainly be challenging thanks to hills and tight corners.

Another option is to transport it to a nice stretch of country road about 15 minutes from here where there is very little traffic and fairly smooth straight terrain. There are many cyclists using this stretch. I can just see myself eating roadies up once again as I slip under the wind and pass them one by one!

 

Some forkless bike examples

 

This time though, I want a very unique lowracer that has 700cc or 26 inch wheels on the front and back, a rear suspension, over seat steering, and no front forks. Yep, you read that right, no front forks! I have two designs for a forkless bike: one with a hinged triangle and the other with a wrap around frame that allows the front wheel to pivot much like the front wheels of a quad or tadpole trike.

Having no fork over the front wheel would mean that a larger wheel could be used without obstructing the pilot’s view. This will also smooth out the ride, so it would be a decent chassis for an aerodynamic fairing, allowing the rear suspension and long frame take up the bumps. Suspension is a must on a faired lowracer since these things can easily reach automobile speeds, making the smallest bump feel like a pothole. The forkless design and long wheelbase configuration also keep the front of the fairing low so that you can see the road ahead rather than having to peer around the body. This type of streamliner would not be all that great for pack racing on a track, but out on the open road, it would be a real blast!

 

A crazy pivot fork bike

 

The easiest forkless design is shown in my sketch and in these cool examples, where the hub pivots on a kingpin held in place by a single tube that wraps around the wheel, leaving space for the turn. I would run a connecting rod up to a control arm just behind the front wheel and then use dual cable steering to get around the curved tube so that there would be less flex in the system and tighter side tolerances for a fitting into a full fairing.

My other version involves a hinged triangle with the pivot very low behind the wheel to keep the tiller effect minimal. I have tried this in the past on this crazy ride called “Tour De Hell”, but the result was a bike that had serious bad attitude and took a lot of practice to ride smoothly.

Of course, having a short wheelbase and a huge amount of tiller, this bike steered like a front end loader, swinging from side to side and causing serious steering feedback. I think this system would work out on a long wheelbase recumbent if the pivot had more caster and was placed much lower to get it closer to the axle. I am not sure if I will actually try the pivot fork design since the other method would defiantly work as expected.

Perhaps this winter I may cut some tubing and lay out my new forkless highway lowracer. I always wanted to build a long wheelbase lowracer and then go all the way on a fiberglass fairing so I can get out and push the limits of what is considered possible under human power. I certainly won’t be heading to Battle Mountain to race with the big boys of speed, but I would certainly have fun smoking past road bikes doing 50 MPH on a faired lowracer down our country roads!

~ Brad

New Plan Online – The Transporter Cargo Bike

The Transporter Upright Cargo Bike

 

Well, it’s finally online! The Transporter Upright Cargo Bike is the latest addition to the AZ plans page and is ready for download. It has been a real battle trying to find a few hours between the rain to get the bike photographed, but the weekend played nice for an entire day. I had fun moving some cargo around the yard and down our windy, hilly dirt roads and everything worked perfectly.

This plan takes a typical department store mountain bike or road bike and converts it into a rear loading cargo bike, leaving the front section of the bike in its original form. By keeping the part bike mostly unmodified at the front, the ride and stance is much the same as any bicycle, so you can head out into traffic and maintain eye level with those gas guzzlers.

A typical yard sale mountain bike

 

This plan is highly adaptable to your needs, and includes a rugged frame that can carry many different types of cargo carrying systems. The Transporter can be made to practically any wheelbase and the entire plan only requires standard bicycle components and a few lengths of round or square tubing, so it will be an inexpensive and straightforward build. I opted for a flatbed cargo top since I intend to move some large items around such as firewood and potted plants.

Testing the brakes down our hill

 

I loaded some heavy cargo and drove the bike down the steep hill up to our driveway for a brake test. Even using only the front disc brake seemed to offer adequate stopping power, and the handling was good. The only learning curve was getting used to the wide turning circle of a bike with an 8 foot wheel base. I did manage to get it turned around in the width of our narrow dirt road, but did use the entire road to do so. For typical navigation, the bike handles just like a regular cycle.

Blending in with the wildflowers

 

Our field is just bursting with color these days thanks to the rainforest-like climate over the last few months. Normally, the wildflowers bloom in shifts of yellow, white and then purple, but this year they are all here at the same time. I rolled the Transporter over to the edge of the yard and got some great shots of the bike contrasting against the rolling blue and white sky and the matching yellow in the field. I think photographing a bike is almost as fun as riding it, and I enjoy trying out different backgrounds to set the mood of the shot.

Well, there you have it, another plan completed. We are now turning our focus towards a set of highly detailed welding, grinding and bike hacking tutorials which will be part of our tutorials page and offered for sale as a complete DVD as well. I should be able to do most of the filming under the non-leaky section of the old trailer, so the rain will not get in the way this time.

~ Brad

100 million volts and an un-ridable scooter

Lightning and propane – not so good! This picture was taken after dark.

Last night was yet another typical example of the weather around here for the last two months – torrential downpours followed by non-stop lightning. Is it just me or has the weather really changed over the last few years? Everything is much more intense it seems, with more snow, more rain, more heat and more cold. Global warming? Yeah right, maybe in the summer, but winter around here is worse than ever. I would like to propose a new term for this wild shift in weather – “Climate Amplification”. Things are not hotter or colder; they are just more intense.

But, I did have fun with the camera last night.

A very intense strike at the back of our yard

The lightning flashes were so intense and so often that it was easy to capture them with a camera. Odd, when I was younger I tried so many times to get just one photo of lighting but never could and now I can get 50 good shots on two days out of a typical week. Perhaps my next project should be a giant high voltage capacitor that can store 100 million volts and then convert it to a lower voltage for later use. Hmmm…as some of you might know from this project, I actually have built equipment almost capable of that feat!

http://lucidscience.com/gal-rock%20disaggregator-1.aspx

Oh well, the show was definitely fun to watch, and the strikes were not so close that we felt like running.

Watching lightning is so cool! My favorite strikes are the ones that look a mile wide and make that phhhzzzzttt-shhhaaaaaaa-powwwwwwww sound, rocking the house to the foundation. I actually captured one of these strikes last night, and judging from the photo, the strike was probably just at the boundary of our yard, about a mile away. You know the lighting is close when sound and flash are less than a second apart since sound travels at 750 miles per hour.

I could never actually ride this thing!

OK, enough about the weather, it’s starting to aggravate me now since once again I am stuck indoors due to the usual 60% chance of thunder showers today. Maybe one day I will actually get to take the last few photos needed to release the Transporter Cargo Bike plan.

As a diversion, I dug deep into my bike graveyard photo director and found this funny one wheeled scooter contraption that I built and could not ride. The idea was to balance like a pendulum and kick with one foot to glide. I figured it would take some serious practice to learn to balance this thing, but being decent on a unicycle and able to pilot almost anything, I thought I could do it – wrong! After a long weekend at camp and almost non-stop practice, I managed a total of about 100 feet on the one wheel scooter. Seems, there was not enough counter force at work when pushing along the Z axis, although side-to-side balancing was pretty easy.

Of course, I will never give up until I make a workable one wheeled scooter and do have another plan that involves some counter acting weights and a sneaky lever system, but probably won’t try it anytime soon. I did make this thing out of the one wheel scooter though, so it wasn’t a total loss.

http://atomiczombie.com/Tutorial%20-%20The%20Spin%20Scooter%20-%20Page%201.aspx

Well, that’s about it for now, not too much in the way of bike building progress, but tomorrow is actually calling for no rain, so the Transporter may get finished finally. If it rains again tomorrow, I am giving up on building anything with wheels and will start making water craft!

~ Brad

www.AtomicZombie.com